Add How one can Replace the Fluorescent Starter in A Windhager Bug Zapper

How-one-can-Replace-the-Fluorescent-Starter-in-A-Windhager-Bug-Zapper.md

@@ -0,0 +1,7 @@
+<br>Fourmilab is surrounded on three sides by farmland. In the summer season, bugs are in every single place. Faced with this case, defence in depth is the only choice:  [ZapZone Defender](http://www.tukang.digital/katherinegurne) window screens, bats, Odonata on the pond,  [Defender by Zap Zone](https://wiki.anythingcanbehacked.com/index.php?title=Are_Bug_Zappers_Really_Effective_Towards_Mosquitoes) fly strips on the windows and swatters in every room, and because the last stage of terminal defence, high voltage bug zappers with ultraviolet fluorescent lures. These should not elegant devices,  [Zap Zone Defender](https://bbclinic-kr.com:443/nose/nation/bbs/board.php?bo_table=E05_4&wr_id=200748) however they get the job done. The principle couldn't be easier-flying insects, whose compound eyes see lengthy-wave ultraviolet mild that mammalian eyes don't, are attracted by the lure tube, which appears to emit a dim blue light to people. To achieve the sunshine, they have to fly between wires electrified with between 4 and eight kilovolts which, when the insect completes the circuit, kill-a-bug. The one drawback (not less than if you aren't a flying insect) is that they do not appear to final very long. After a little more than one summer time, the bulb either begins to flash on and off like a strobe mild or simply refuses to mild in any respect.<br>
+
+<br>Replacement bulbs are readily available and easy to install, but in my expertise, at least half the time changing the bulb would not repair the issue. With no gentle to attract the insects, a zapper is ineffective, so regardless that its high voltage subsystem continues to work perfectly, most individuals junk it when altering the bulb would not make it gentle up. I'm means too low cost to be happy with such a state of affairs, so I decided to open up a failed bug zapper and see what was going on. The supply of the issue proved to be as simple as I anticipated and as simple to treatment, so within the hope of saving someone else the difficulty of figuring it out, I've scribbled these notes on how to restore your personal bug zappers. These directions pertain to bug zappers made [Defender by Zap Zone](https://miurl.do/natishafoster4) the Windhager company of Salzburg, Austria, who have a dominant market share on this obscure trade here in Central Europe.<br>
+
+<br>Obviously,  [Defender by Zap Zone](https://wiki.lafabriquedelalogistique.fr/Utilisateur:LuannBaskin79) when you've got a bug zapper made by one other company, it should look completely different inside and will conceivably use a wholly different circuit for the fluorescent lamp. Unless you perceive what you are doing and know sufficient electronics to be assured you're not going to do something silly, it's best to leave issues nicely enough alone and get a new bug zapper. Further, we will be disassembling and modifying a system which, when opened up, has uncovered connections to doubtlessly lethal mains present and  [Official Zap Zone Defender](https://safeareamain.com/bbs/board.php?bo_table=free&wr_id=78839) extremely unpleasant if not deadly high voltage. If you are sufficiently stupid or scatterbrained that you are prone to forget to tug the mains plug before sticking your hand inside the guts of a bug zapper, it is best to stop studying immediately and select some safer venture, like making microwave popcorn. To begin with, earlier than beginning this procedure, remember to try replacing the bulb and see if that fixes the problem.<br>
+
+<br>If it does, you have saved a variety of time and, if not, you are going to want a alternative bulb eventually, so why not have one available when the time comes? If a new bulb would not do the trick, the problem is sort of certainly a failed fluorescent starter contained in the field, so we'll must open it up. You did remember to unplug the zapper before beginning to disassemble it, did not you? First, take away the bug catcher tray at the bottom of the zapper, taking care not to spill dead bugs everywhere in the ground or your work space. Depending on the model, the 2 halves of the physique of the bug zapper are fastened along with four or six screws. On "industrial" fashions, these are 2 mm metric machine screws and nuts, however some "consumer" fashions use infernal "split slot" screws which are intended to keep you from opening up the machine. You see, you're a client, so you're expected to eat-buy, purchase, purchase, not mend issues which break.<br>